Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Camry L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Heated Oxygen Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Heated Oxygen Sensor

REMOVAL

REMOVE HEATED OXYGEN SENSOR




a. Disconnect the heated oxygen sensor connector.




b. Using SST, remove the heated oxygen sensor from the exhaust pipe assembly front No. 3.

SST 09224-00010

NOTE: Do not damage the heated oxygen sensor.

INSTALLATION

INSTALL HEATED OXYGEN SENSOR

a. Temporarily tighten the heated oxygen sensor.

NOTE: Do not damage the heated oxygen sensor.




b. Using SST, fully tighten the heated oxygen sensor.

SST 09224-00010

Torque: 44 N.m (449 kgf.cm, 32 ft.lbf)




c. Connect the heated oxygen sensor connector.
pro multis · About Operation CHARM