Entry Lock and Unlock Switch

REMOVAL

1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG
3. REMOVE ASSIST GRIP COVER
4. REMOVE COURTESY LIGHT ASSEMBLY
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY
6. REMOVE FRONT DOOR SERVICE HOLE COVER
7. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY
8. REMOVE FRONT DOOR OUTSIDE HANDLE COVER




9. REMOVE FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY
a. Disconnect the connector.




b. Remove the front door outside handle assembly as shown in the illustration.

INSTALLATION

1. INSTALL FRONT DOOR OUTSIDE HANDLE SUB-ASSEMBLY




a. Insert the front end of the front door outside handle assembly into the front door outside handle frame.




b. Insert the rear end of the front door outside handle assembly into the front door outside handle frame. Slide the front door outside handle assembly to the front of the vehicle to install it.
c. Connect the connector.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER
3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY
4. INSTALL FRONT DOOR SERVICE HOLE COVER
5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
6. INSTALL COURTESY LIGHT ASSEMBLY
7. INSTALL ASSIST GRIP COVER
8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH