Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Camry V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Heating and Air Conditioning >> Ambient Temperature Sensor / Switch HVAC >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)
2. REMOVE FRONT BUMPER ASSEMBLY (w/o Fog Light)
3. REMOVE FRONT BUMPER ASSEMBLY (w/ Fog Light)




4. REMOVE AMBIENT TEMPERATURE SENSOR
a. Disconnect the connector and detach the clamp.
b. Remove the ambient temperature sensor.

INSTALLATION




1. INSTALL AMBIENT TEMPERATURE SENSOR
a. Install the ambient temperature sensor with the clamp.
b. Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light)
3. INSTALL FRONT BUMPER ASSEMBLY (w/Fog Light)
4. INSTALL COOL AIR INTAKE DUCT SEAL
5. VEHICLE PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light)
6. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light)
7. INSPECT FOG LIGHT AIMING (w/ Fog Light)
8. ADJUST FOG LIGHT AIMING (w/ Fog Light)
pro multis · About Operation CHARM