Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Highlander 2WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Central Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Central Control Module: Service and Repair

Network Gateway ECU:




NETWORK GATEWAY ECU

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
3. REMOVE INSTRUMENT PANEL NO.2 FINISH PANEL LOWER




4. REMOVE NETWORK GATEWAY ECU
a. Disconnect the connector.
b. Remove the bolt and network gateway ECU.

INSTALLATION




1. INSTALL NETWORK GATEWAY ECU
a. Install the network gateway ECU with the bolt.
b. Connect the connector.
2. INSTALL INSTRUMENT PANEL NO.2 FINISH PANEL LOWER
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION

NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.
pro multis · About Operation CHARM