Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Highlander 2WD V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Steering Angle Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Angle Sensor: Service and Repair

REMOVAL

1. PRECAUTION
2. SEPARATE BATTERY NEGATIVE TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING PAD ASSEMBLY
5. REMOVE STEERING WHEEL ASSEMBLY
6. REMOVE STEERING COLUMN COVER
7. REMOVE SPIRAL CABLE
8. REMOVE STEERING SENSOR




a. Release 6 claw fittings and remove the steering sensor from the spiral cable.

INSTALLATION

1. INSTALL STEERING SENSOR




a. Install the steering sensor to the spiral cable.

NOTE:
- Install the claw securely.
- Do not damage the claw.

2. ADJUST CENTER FRONT WHEEL
3. INSTALL SPIRAL CABLE
4. ADJUST SPIRAL CABLE
5. INSTALL STEERING WHEEL ASSEMBLY
6. INSTALL STEERING PAD ASSEMBLY
7. INSPECT STEERING WHEEL CENTER POINT
8. INSPECT STEERING PAD ASSEMBLY
9. INSPECT SRS WARNING LIGHT
10. INSPECT ABS WARNING LIGHT AND VSC WARNING LIGHT
pro multis · About Operation CHARM