Pinout Values and Diagnostic Parameters
TERMINALS OF ECM
HINT: Each ECM terminal's standard voltage is shown in the table.
In the table, first follow the information under "Condition". Look under Symbols (Terminal No.) for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition". Use the illustration above as a reference for the ECM terminals.
Waveform 1 (Reference):
Waveform 2 (Reference):
Waveform 3 (Reference):
Waveform 4 (Reference):
Waveform 5 (Reference):
Waveform 6 (Reference):
