Pattern Select Switch 2nd Start Mode Circuit
Pattern Select Switch 2nd Start Mode CircuitDESCRIPTION
When 2nd start mode is selected with the pattern select switch, the ECM controls the solenoid valves and the transmission starts from 2nd gear.
In the D position, the transmission automatically shifts up through 3rd to 5th as usual.
In the 2nd position, the transmission is held in 2nd gear.
WIRING DIAGRAM:
HINT: *: Pattern select switch (2nd start switch)
When the 2nd start switch is pushed, the switch contact is made and the 2nd mode is selected. To cancel the 2nd start, push the 2nd start switch once again.
INSPECTION PROCEDURE
Step 1(Part 1):
Steps 1(Part 2)-2:
