Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Matrix L4-1.8L (1ZZ-FE) >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Speed Sensor
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Speed Sensor

REMOVAL

HINT: Replace the RH side by the same procedure as the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER LINER LH
3. REMOVE SPEED SENSOR FRONT LH




a. Disconnect the speed sensor wire harness clamp from the body.
b. Disconnect the speed sensor connector.




c. Remove the 2 clamp bolts holding the sensor harness from the body and shock absorber.




d. Remove the bolt and speed sensor front LH.

NOTE: Keep on the sensor tip clean.

INSTALLATION

1. INSTALL SPEED SENSOR FRONT LH




a. Install the speed sensor front LH with the bolt.

Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)

NOTE: Make sure the sensor tip is clean.




b. Install the sensor harness clamp with the 2 bolts "A" and "B" to the body and shock absorber.

Torque:
Bolt A 8.0 N.m (82 kgf.cm, 71 in.lbf)
Bolt B 29 N.m (296 kgf.cm, 21 ft.lbf)




c. Connect the speed sensor connector.
d. Connect the speed sensor wire harness clamp to the body.

2. INSTALL FRONT FENDER LINER LH
3. INSTALL FRONT WHEEL

Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)

4. CHECK ABS SPEED SENSOR SIGNAL
pro multis · About Operation CHARM