Traction Control Switch (For 2WD)
REMOVAL1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE TRACTION CONTROL SWITCH (AUTO LSD SWITCH)
a. Detach the 2 claws and remove the switch.
INSTALLATION
1. INSTALL TRACTION CONTROL SWITCH (AUTO LSD SWITCH)
a. Attach the 2 claws to install the switch.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL