Keyless Entry Transmitter: Service and Repair

Door Control Transmitter Module:

DOOR CONTROL TRANSMITTER MODULE

REMOVAL

1. REMOVE TRANSMITTER HOUSING COVER

NOTE: Take extra care when handling these precision electronic components.




a. Twist the screwdriver in the direction of the arrow mark in the illustration, and open the transmitter housing cover.

NOTE: Do not forcibly pry the cover.

HINT: Tape the screwdriver tip before use.




2. REMOVE DOOR CONTROL TRANSMITTER MODULE

INSTALLATION




1. INSTALL DOOR CONTROL TRANSMITTER MODULE

NOTE: Take extra care when handling these precision electronic components.




2. INSTALL TRANSMITTER HOUSING COVER
a. Install the transmitter housing cover to the transmitter housing case.
b. Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times.

OK: Transmitter's LED illuminates 3 times when switch is pressed 3 times.