Rear Wheel Alignment

NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).

REAR WHEEL ALIGNMENT ADJUSTMENT
1. INSPECT TIRE
2. MEASURE VEHICLE HEIGHT





3. INSPECT TOE-IN

Standard Toe-In:

If the toe-in is not within the specified range, inspect the suspension parts and replace them if necessary.

4. INSPECT CAMBER
a. Install the camber-caster-kingpin gauge or set the vehicle on the wheel alignment tester.
b. Inspect the camber.

Standard Camber:

HINT:
- : w/ 3rd seat
- Camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary