Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> RAV4 2WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair

Ignition Switch:




Ignition Switch

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING COLUMN COVER LOWER

a. Remove the steering column cover lower.

3. REMOVE IGNITION SWITCH ASSEMBLY




a. Disconnect the ignition switch connector.




b. Disconnect the ignition key cylinder light connector.
c. Remove the 2 screws and ignition switch.

INSTALLATION

1. INSTALL IGNITION SWITCH ASSEMBLY




a. Install the ignition switch with the 2 screws.




b. Connect the ignition key cylinder light connector.
c. Connect the ignition switch connector.

2. INSTALL STEERING COLUMN COVER LOWER

a. Install the steering column cover lower.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
pro multis · About Operation CHARM