Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> RAV4 4WD L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair

4WD CONTROL ECU

COMPONENTS:





REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY





3. REMOVE 4WD CONTROL ECU
(a) Disconnect the connector.
(b) Remove the bolt and ECU.

INSTALLATION





1. INSTALL 4WD CONTROL ECU
(a) Install the ECU with the bolt.
Torque: 4.5 Nm (46 kgf-cm, 40 inch lbs.)
(b) Connect the connector.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
pro multis · About Operation CHARM