Ignition Switch: Service and Repair

Ignition Switch:

Ignition Switch

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL




2. REMOVE STEERING COLUMN COVER LOWER
a. Insert the key into the ignition key cylinder and release the steering lock.
b. Turn the steering wheel clockwise to gain access to the screw and remove the screw.




c. Turn the steering wheel counterclockwise to gain access to the screw and remove the screw.
d. Detach the 4 claws, and remove the steering column cover lower.




3. REMOVE IGNITION SWITCH ASSEMBLY
a. Disconnect the ignition switch connector.
b. Remove the 2 screws and ignition switch.

INSTALLATION




1. INSTALL IGNITION SWITCH ASSEMBLY
a. Install the ignition switch with the 2 screws.
b. Install the ignition switch connector.

2. INSTALL STEERING COLUMN COVER LOWER
a. Attach the 4 claws to install the steering column cover lower.




b. Insert the key into the ignition key cylinder and release the steering lock.
c. Turn the steering wheel counterclockwise and install the screw.




d. Turn the steering wheel clockwise and install the screw.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL