Overhaul

Air Conditioning Control Assembly:

DISASSEMBLY




1. REMOVE CONTROL KNOB SUB-ASSEMBLY
a. Remove the 3 control knob sub-assemblies.




2. REMOVE HEATER CONTROL PANEL
a. Remove the 4 screws.
b. Using a screwdriver, disengage the 6 claws and remove the heater control panel.

HINT: Tape up the screwdriver tip before use.




3. REMOVE A/C SWITCH
a. Using a screwdriver, pry out the A/C switch.

HINT: Tape up the screwdriver tip before use.




4. REMOVE REC SWITCH
a. Using a screwdriver, pry out the REC switch.

HINT: Tape up the screwdriver tip before use.




5. REMOVE BULB
a. Using a screwdriver, turn the 2 bulbs counterclockwise and pull them out.

REASSEMBLY




1. INSTALL BULB
a. Using a screwdriver, turn the 2 bulbs clockwise to install them.




2. INSTALL REC SWITCH
a. Engage the 2 claws and install the REC switch.




3. INSTALL A/C SWITCH
a. Engage the 2 claws and install the A/C switch.




4. INSTALL HEATER CONTROL PANEL
a. Engage the 6 claws and install the heater control panel.
b. Install the 4 screws.




5. INSTALL CONTROL KNOB SUB-ASSEMBLY
a. Install the 3 control knob sub-assemblies.