Body - General Maintenance
BODYGENERAL MAINTENANCE
1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
(a) Tighten the bolts and nuts on the chassis parts listed below, if necessary.
^ Front axle and suspension
^ Drive train
^ Rear axle and suspension
^ Brake system
^ Engine mounting
^ Other chassis parts
(b) Tighten the bolts and nuts on the body parts listed below, if necessary.
^ Seat belt system
^ Seats
^ Doors and hood
^ Body mountings
^ Fuel tank
^ Exhaust pipe system
^ Other body parts
2. REPLACE CLEAN AIR FILTER SUB-ASSEMBLY
(a) Remove the glove compartment assembly.
(b) Remove the filter case from the filter outlet.
(c) Remove the filter from the filter case.
(d) Replace the filter with a new one.
(e) The installation procedures are the removal procedures in reverse order.