Crankshaft, Engine

Crankshaft
Crankshaft thrust clearance
Standard 0.04 to 0.24 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Crankshaft circle runout
Maximum 0.06 mm (0.0024 inch)
Main journal diameter 71.988 to 72.000 mm (2.8342 to 2.8346 inch)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crank pin diameter 55.992 to 56.000 mm (2.2044 to 2.2047 inch)
Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crankshaft oil clearance
Standard 0.018 to 0.030 mm (0.0007 to 0.0012 inch)
Maximum 0.046 mm (0.0018 inch)
Straight pin
Standard protrusion
Pin A 22.5 to 23.5 mm (0.886 to 0.925 inch)
Pin B 10.5 to 11.5 mm (0.413 to 0.453 inch)
Pin C 8.5 to 9.5 mm (0.335 to 0.374 inch)
Pin D 5.5 to 6.5 mm (0.217 to 0.256 inch)