Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Tundra 4WD V8-5.7L (3UR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Coolant Temperature Sensor/Switch (For Computer): Service and Repair

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE V-BANK COVER SUB-ASSEMBLY
3. DRAIN ENGINE COOLANT




4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
a. Disconnect the sensor connector.
b. Remove the sensor.
c. Remove the gasket from the sensor.

INSTALLATION




1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
a. Install a new gasket to the sensor.
b. Install the sensor.

Torque: 20 N.m (200 kgf.cm, 14 ft.lbf)

c. Connect the sensor connector.

2. ADD ENGINE COOLANT
3. INSPECT FOR COOLANT LEAK
4. INSTALL V-BANK COVER SUB-ASSEMBLY
5. INSTALL NO. 1 ENGINE UNDER COVER
pro multis · About Operation CHARM