Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Control Switch (For Sedan)

Door Control Switch (for Sedan):




DOOR CONTROL SWITCH (for Sedan)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT ARMREST BASE UPPER PANEL

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)




a. Remove the 3 screws and the power window regulator master switch.




4. REMOVE DOOR CONTROL SWITCH
a. for Front passenger side with power window:
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door control switch.




b. w/o Power window:
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door control switch.

INSTALLATION

1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)




a. Install the power window regulator master switch with the 3 screws.




2. INSTALL DOOR CONTROL SWITCH
a. for Front passenger side with power window:
Engage the 2 claws and install the door control switch.




b. w/o Power window:
Engage the 2 claws and install the door control switch.

3. INSTALL FRONT ARMREST BASE UPPER PANEL

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)