Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Yaris L4-1.5L (1NZ-FE) >> Repair and Diagnosis >> Power and Ground Distribution >> Power Distribution Relay >> Service and Repair >> Integration Relay
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Integration Relay

Integration Relay:




INTEGRATION RELAY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE RELAY BLOCK COVER NO.1




3. REMOVE INTEGRATION RELAY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
b. Disconnect the 3 connectors.

INSTALLATION

1. INSTALL INTEGRATION RELAY
a. Connect the 3 connectors.
b. Attach the integration relay to the engine room relay block.

2. INSTALL RELAY BLOCK COVER NO.1
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
pro multis · About Operation CHARM