Accelerator Pedal Position Sensor: Testing and Inspection

ON-VEHICLE INSPECTION




1. INSPECT ACCELERATOR PEDAL ASSEMBLY

a. Connect an intelligent tester to the DLC3.
b. Turn the ignition switch ON and turn the tester ON.
c. Select the following menu items: Powertrain / Engine and ECT / Data List / Accelerator Pedal Position No. 1 and Accelerator Pedal Position No. 2.

d. While the accelerator pedal is depressed or released, check that the values of accelerator pedal position No. 1 and accelerator pedal position No. 2 are within the specifications.




Accelerator Pedal Position No. 1 Standard Voltage




Accelerator Pedal Position No. 2 Standard Voltage

HINT: If the results are not as specified, check the accelerator pedal, wire harness or ECM.