Removal

CRUISE CONTROL: CLUTCH SWITCH:

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (Removal)

3. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH (for TMC Made) (Removal)

4. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH (for TMMK Made) (Removal)

5. REMOVE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)
(a) Disconnect all connectors.





(b) Remove the 2 nuts and the main body ECU (cowl side junction block LH).
6. REMOVE CLUTCH SWITCH ASSEMBLY
(a) Disconnect the connector.





(b) Loosen the nut and remove the clutch switch assembly.