Removal

U250E AUTOMATIC TRANSAXLE: PARK / NEUTRAL POSITION SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE BATTERY (Removal)

3. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY





(a) Remove the nut from the control shaft lever.
(b) Disconnect the transmission control cable assembly from the control shaft lever.





(c) Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

NOTE: Do not hold the resin guide pipe.

4. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY





(a) Disconnect the park/neutral position switch connector.





(b) Remove the nut, washer and control shaft lever.





(c) Using a screwdriver, pry up the lock plate.





(d) Remove the lock nut and the lock plate.





(e) Remove the 2 bolts and pull out the park/neutral position switch.