Installation

BRAKE CONTROL: DOWNHILL ASSIST CONTROL SWITCH (for 4WD): INSTALLATION

INSTALLATION

1. INSTALL DOWNHILL ASSIST CONTROL SWITCH






(a) Engage the 2 claws and install the downhill assist control switch.






(b) Connect the downhill assist control switch connector.
2. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation

3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Smart Key System) Installation

4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Smart Key System) Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

6. CHECK FOR WARNING LIGHT AND INDICATOR LIGHT
Test Mode Procedure