Removal

PRE-COLLISION: SEAT BELT CONTROL ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION Removal

3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH Removal

4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal

6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

8. REMOVE NO. 1 SWITCH HOLE BASE Removal

9. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL Removal

10. REMOVE SEAT BELT CONTROL ECU

(a) Disconnect the connectors.
(b) Remove the 2 nuts and seat belt control ECU together with the certification ECU.