Removal

BRAKE: REAR DISC BRAKE:

COMPONENTS





REMOVAL

HINT: Overhaul the RH side by the same procedure as the LH side.

1. REMOVE REAR WHEEL
2. DRAIN BRAKE FLUID

NOTE: Wash the brake fluid off immediately if it comes into contact with any painted surface.

3. REMOVE DISC BRAKE PAD KIT REAR (PAD ONLY)





(a) Remove the clip, anti-rattle spring No. 1 and anti-rattle spring No. 2.
(b) Remove the 2 pad guide pins and disc brake pads with anti-squeal shims.
(c) Remove the anti-squeal shims from each pad.
4. REMOVE DISC BRAKE CYLINDER ASSEMBLY REAR LH
(a) Remove the union bolt and gasket from the disc brake cylinder, then disconnect the flexible hose from the disc brake cylinder.

HINT: Gasket has 2 types: 2-piece type and 1-piece type.





(b) Remove the 2 bolts and disc brake cylinder.