Removal

AIR CONDITIONING: COMPRESSOR AND MAGNETIC CLUTCH (for 1ZZ-FE):

COMPONENTS





REMOVAL

1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM (Service and Repair)

2. DISCONNECT SUCTION HOSE SUB-ASSEMBLY





(a) Remove the bolt and disconnect the cooler refrigerant suction hose No. 1 from the compressor and magnetic clutch.
(b) Remove the O-ring from the cooler refrigerant suction hose No. 1.

NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY





(a) Remove the bolt and disconnect the discharge hose sub-assembly from the compressor and magnetic clutch.
(b) Remove the O-ring from the discharge hose sub-assembly.

NOTE: Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

4. REMOVE ENGINE UNDER COVER RH
5. REMOVE FAN AND GENERATOR V BELT (Removal)

6. REMOVE COMPRESSOR AND MAGNETIC CLUTCH





(a) Disconnect the connector.
(b) Remove the 3 bolts and compressor and magnetic clutch.