Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Sequoia 2WD V8-5.7L (3UR-FE) >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Component Tightening Specifications and Sequences >> Flex Plate
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Flex Plate

DRIVE PLATE AND RING GEAR SUB-ASSEMBLY





Install and uniformly tighten 10 new bolts in the sequence shown in the illustration.
Torque: 30 Nm (301 kgf-cm, 22 ft-lbf)
- Do not reuse the flywheel installation bolts.
- Do not strike or damage the flywheel installation bolts. Be sure to handle them carefully.





Mark the upside of each flywheel installation bolt with paint.
Tighten the flywheel installation bolts another 90° as shown.
Check that the painted marks are now at a 90° angle to the upside.
pro multis · About Operation CHARM