Installation

CRUISE CONTROL: CLUTCH SWITCH:

INSTALLATION

1. INSTALL CLUTCH SWITCH ASSEMBLY





(a) Insert the clutch switch assembly by turning it until the bolt touches the cushion of the clutch pedal.
(b) Adjust the clutch switch assembly to the specified value between the cushion and the bracket as shown in the illustration.
(c) Tighten the lock nut to fix the clutch switch assembly.
2. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
3. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
4. INSTALL FRONT DOOR SCUFF PLATE LH