Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Solara Convertible V6-3.3L (3MZ-FE) >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Tire Monitoring System >> Tire Pressure Module >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the connector and clamp to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH
3. INSTALL NO. 1 UNDER INSTRUMENT PANEL COVER SUB-ASSEMBLY
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for Coupe)
5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for Convertible)
6. INSTALL FRONT DOOR SCUFF PLATE RH (for Coupe)
7. INSTALL FRONT DOOR SCUFF PLATE RH (for Convertible)
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

9. REGISTER TRANSMITTER ID
HINT: (Registration).

10. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: (Test Mode Procedure).

11. INITIALIZE SYSTEM

NOTICE:
- Be sure to register the transmitter IDs of all tires including the grand spare tire in the ECU before initialization.
- Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.

HINT: (Initialization).
pro multis · About Operation CHARM