Installation

2AZ-FE ENGINE CONTROL SYSTEM: KNOCK SENSOR:

INSTALLATION

1. INSTALL KNOCK SENSOR





(a) Install the sensor with the nut.
Torque: 20 Nm (199 kgf-cm, 14 ft-lbf)

HINT: Angling the knock sensor below the horizontal (below 0°) is recommended.

(b) Connect the sensor connector.
2. INSTALL INTAKE MANIFOLD





(a) Install a new gasket and the intake manifold with the 5 bolts and 2 nuts.
Torque: 30 Nm (306 kgf-cm, 22 ft-lbf)
3. INSTALL THROTTLE BODY ASSEMBLY
HINT: (Installation).

4. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
5. CHECK CONNECTION OF VACUUM HOSE
6. ADD ENGINE COOLANT
HINT: (Service and Repair).

7. CHECK FOR ENGINE COOLANT LEAKS
HINT: (Service and Repair).