Removal

1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DRAIN ENGINE COOLANT (Service and Repair)

3. REMOVE V-BANK COVER (Removal)

4. REMOVE AIR CLEANER ASSEMBLY (Removal)

5. REMOVE VVT SENSOR





(a) RH bank side VVT sensor:
(1) Disconnect the VVT sensor connector.
(2) Remove the bolt and VVT sensor.
(b) LH bank side VVT sensor:





(1) Disconnect the water by-pass hoses No. 4 and No. 5.
(2) Disconnect the VVT sensor connector.





(3) Remove the bolt and VVT sensor.