Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Tundra 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Service and Repair >> Door Control Receiver (for Double Cab) >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








DOOR LOCK: DOOR CONTROL RECEIVER (for Double Cab):

INSTALLATION





1. INSTALL DOOR CONTROL RECEIVER
(a) Install the receiver with the bolt.
(b) Connect the door control receiver connector.
2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH
3. INSTALL REAR DOOR SCUFF PLATE RH
(a) Install rear door scuff plate (Installation).

HINT: The procedures listed below are for the LH side.

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
5. INSTALL REAR SEAT ASSEMBLY (Installation)

6. INSTALL SEAT FLOOR BOX (Installation)

7. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (Installation)

8. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (Installation)
pro multis · About Operation CHARM