Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Tundra 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Keyless Entry Module >> Service and Repair >> Door Control Receiver (for Double Cab) >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








DOOR LOCK: DOOR CONTROL RECEIVER (for Double Cab):

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (Removal)

2. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (Removal)

3. REMOVE SEAT FLOOR BOX (Removal)

4. REMOVE REAR SEAT ASSEMBLY (Removal)

5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
6. REMOVE REAR DOOR SCUFF PLATE RH
(a) Remove the front door scuff plate (Removal).

HINT: The procedures listed below are for the LH side.

7. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH (Removal)





8. REMOVE DOOR CONTROL RECEIVER
(a) Disconnect the door control receiver connector.
(b) Remove the bolt and receiver.
pro multis · About Operation CHARM