Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Tundra 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








2UZ-FE STARTING: IGNITION SWITCH:

INSTALLATION

1. INSTALL IGNITION SWITCH ASSEMBLY (Reassembly)

2. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual Tilt) (Reassembly)

3. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column) (Reassembly)

4. INSTALL UPPER STEERING COLUMN WITH SWITCH BRACKET ASSEMBLY (for Power Tilt and Power Telescopic Steering Column) (Reassembly)

5. INSTALL STEERING COLUMN ASSEMBLY
(a) for Manual Tilt:
Install the steering column (Installation).
(b) for Manual Tilt and Telescopic:
Install the steering column (Installation).
(c) for Power Tilt and Power Telescopic:
Install the steering column (Installation).
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).
pro multis · About Operation CHARM