Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> Tundra 4WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








JF1A TRANSFER: 4WD CONTROL ECU:

INSTALLATION

1. INSTALL 4WD CONTROL ECU





(a) Install the ECU with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 2 ECU connectors.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH (Installation)

3. INSTALL INSTRUMENT SIDE PANEL RH (Installation)

4. INSTALL COWL SIDE TRIM BOARD RH
(a) Install the cowl side trim board RH (Installation).

HINT: Use the same procedures described for the LH side.

5. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab)
(a) Install the front door scuff plate RH (Installation).

HINT: Use the same procedures described for the LH side.

6. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax)
(a) Install the front door scuff plate RH (Installation).

HINT: Use the same procedures described for the LH side.
pro multis · About Operation CHARM