Connecting Rod, Engine
PISTON SUB-ASSEMBLY WITH CONNECTING RODStep 1
Install and alternately tighten the bolts of the connecting rod cap in several steps.
Torque 25 Nm (250 kgf-cm, 18 ft-lbf)
Step 2
Mark the front of the connecting rod cap bolts with paint.
Retighten the cap bolts 90° as shown in the illustration.
Each bearing's standard thickness is indicated by a 1, 2, or 3 mark on its
surface.
Standard Connecting Rod Large End Bore Diameter:
Standard Connecting Rod Bearing Thickness:
