Removal

CRUISE CONTROL: CLUTCH SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal
3. REMOVE FRONT FLOOR FOOTREST Removal
4. REMOVE FOOTREST CLIP Removal
5. REMOVE COWL SIDE TRIM BOARD LH Removal
6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY Removal
8. REMOVE INSTRUMENT PANEL FINISH PLATE Removal
9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Removal
10. REMOVE LOWER INSTRUMENT PANEL LH Removal
11. REMOVE INSTRUMENT PANEL SIDE BRACKET





(a) Remove the bolt and remove the instrument panel side bracket.
12. SEPARATE MAIN BODY ECU (DRIVER SIDE J/B)





(a) Remove the 2 nuts and separate the main body ECU.
13. REMOVE CLUTCH SWITCH ASSEMBLY





(a) Disconnect the connector.
(b) Loosen the nut and remove the clutch switch assembly.