Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Highlander 4WD V6-3.3L (3MZ-FE) Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal








3MZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
3. REMOVE HOOD TO COWL TOP SEAL Removal
4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
6. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Removal
7. REMOVE COOL AIR INTAKE DUCT SEAL Removal
8. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH Removal
9. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
10. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
11. REMOVE AIR CLEANER BRACKET Removal
12. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the engine coolant temperature sensor connector.
(b) Remove the engine coolant temperature sensor and gasket.
pro multis · About Operation CHARM