Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2009 >> Highlander 4WD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Navigation System >> Testing and Inspection >> Component Tests and General Diagnostics >> Display Signal Circuit Between Television Display Assembly and Navigation Receiver Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Display Signal Circuit Between Television Display Assembly and Navigation Receiver Assembly








NAVIGATION: NAVIGATION SYSTEM: Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly

Display Signal Circuit between Television Display Assembly and Navigation Receiver Assembly

DESCRIPTION

This circuit sends a DVD image signal from the television display assembly to the navigation receiver assembly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - TELEVISION DISPLAY ASSEMBLY)




(a) Disconnect navigation receiver assembly connector E6 and television display assembly connector Q13.




(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. INSPECT TELEVISION DISPLAY ASSEMBLY




(a) Reconnect television display assembly connector Q13.
(b) Measure the waveform according to the table below.
OK:





HINT: The waveform pattern may differ from that shown in the illustration below due to differences in the oscilloscope setting. A normal television display assembly operating condition can be determined if any waveform is output.




(c) Oscilloscope waveform
(1) Terminal: Q13-11 (NTS1) - Body ground
Setting: 200 mV/DIV., 10 micro s/DIV.
Condition: DVD display is ON.
NG -- REPLACE TELEVISION DISPLAY ASSEMBLY
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
pro multis · About Operation CHARM