Removal

3UR-FE BATTERY / CHARGING: GENERATOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
3. REMOVE AIR CLEANER HOSE ASSEMBLY Removal
4. REMOVE AIR CLEANER ASSEMBLY Removal
5. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH Removal
6. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH Removal
7. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal
8. REMOVE FAN AND GENERATOR V BELT Removal
9. REMOVE FRONT FENDER APRON SEAL FRONT RH Removal
10. DISCONNECT VANE PUMP ASSEMBLY Removal
11. DISCONNECT OIL COOLER PIPE ASSEMBLY Removal
12. REMOVE GENERATOR ASSEMBLY





(a) Disconnect the generator connector.
(b) Remove the terminal cap and nut, and disconnect the generator wire.
(c) Remove the bolt and wire harness bracket from the generator.





(d) Remove the 3 bolts, nut and generator.