Removal

JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: REMOVAL

REMOVAL

1. REMOVE NO. 1 INSTRUMENT PANEL FINISH CUSHION Removal
2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH Removal
3. REMOVE FRONT DOOR SCUFF PLATE RH Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE COWL SIDE TRIM BOARD RH Removal
6. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Removal
7. REMOVE NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH Removal
8. REMOVE INSTRUMENT PANEL BOX DOOR KNOB Removal
9. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL Removal
10. REMOVE 4WD CONTROL ECU





(a) Disconnect the 2 ECU connectors.
(b) Remove the bolt and ECU.