Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL REAR BUMPER SIDE RETAINER LH

(a) Engage the 2 claws to install a new rear bumper side retainer LH.
(b) Install the screw.
2. INSTALL REAR BUMPER SIDE RETAINER RH
HINT: Use the same procedure for the RH side and LH side.

3. INSTALL REAR BUMPER SIDE SUPPORT LH

(a) Engage the guide and 4 claws to install a new rear bumper side support LH.
(b) Install the 3 screws.
4. INSTALL REAR BUMPER SIDE SUPPORT RH
HINT: Use the same procedure for the RH side and LH side.

5. INSTALL REAR BUMPER ARM LH

(a) Install the rear bumper arm LH with the 3 bolts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
6. INSTALL REAR BUMPER ARM RH
HINT: Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER REINFORCEMENT

(a) Install the rear bumper reinforcement with the 4 nuts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
8. INSTALL REAR BUMPER BAR CENTER REINFORCEMENT
(a) Install the rear bumper bar center reinforcement to the rear bumper energy absorber.
9. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the rear bumper energy absorber.
10. INSTALL REAR BUMPER COVER
11. INSTALL REFLEX REFLECTOR ASSEMBLY LH

(a) Engage the guide and install the reflex reflector assembly LH.
(b) Install the screw.
12. INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side.

13. INSTALL REAR BUMPER SPOILER SUB-ASSEMBLY LH (w/ Rear Lower Spoiler)

(a) Engage the 4 guides to install the rear bumper spoiler sub-assembly LH.
(b) Install the 4 retainers.

(c) Install the clip.
14. INSTALL REAR BUMPER SPOILER SUB-ASSEMBLY RH (w/ Rear Lower Spoiler)
HINT: Use the same procedure for the RH side and LH side.

15. INSTALL REAR LOWER SPOILER SUB-ASSEMBLY (w/ Rear Lower Spoiler)
(a) Engage the 2 clips and 9 guides to install the rear lower spoiler sub-assembly.
(b) Install the 9 retainers.