Removal

U250E AUTOMATIC TRANSMISSION / TRANSAXLE: SPEED SENSOR: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
4. REMOVE AIR CLEANER CASE Removal
5. REMOVE BATTERY Removal
6. REMOVE BATTERY CARRIER Removal
7. REMOVE TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY





(a) Remove the transmission oil level gauge sub-assembly.
(b) Disconnect the transmission wire connector, park/neutral position switch connector and 2 wire harness clamps.
(c) Remove the bolt and transmission oil filler tube sub-assembly.
(d) Remove the O-ring from the transmission oil filler tube sub-assembly.
8. REMOVE SPEED SENSOR NT





(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.
9. REMOVE SPEED SENSOR NC





(a) Disconnect the speed sensor connector.
(b) Remove the bolt and speed sensor.
(c) Remove the O-ring from the speed sensor.