Installation

1NZ-FXE STARTING: POWER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL POWER SWITCH
(a) Install the power switch to the upper finish panel.
2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
4. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
6. INSTALL REAR NO. 3 FLOOR BOARD Installation
7. INSTALL REAR DECK FLOOR BOX Installation
8. INSTALL REAR NO. 2 FLOOR BOARD Installation
9. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.