Removal

2GR-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
HINT: Removal

2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY Removal
3. DRAIN ENGINE COOLANT Service and Repair
4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
5. REMOVE NO. 2 AIR CLEANER INLET Removal
6. REMOVE NO. 1 AIR CLEANER INLET Removal
7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
9. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal
10. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Exhaust Side)





(a) Disconnect the camshaft timing oil control valve assembly connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve.
11. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Intake Side)





(a) Disconnect the camshaft timing oil control valve assembly connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve.
12. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side)





(a) Disconnect the camshaft timing oil control valve assembly connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve.
13. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side)





(a) Disconnect the camshaft timing oil control valve assembly connector.
(b) Remove the bolt and camshaft timing oil control valve assembly.
(c) Remove the O-ring from the camshaft timing oil control valve.