Crankshaft, Engine

CRANKSHAFT SPECIFICATIONS

There are 5 sizes of standard bearings, marked "1", "2", "3", "4" and "5" accordingly.

EXAMPLE: Cylinder block "11" + Crankshaft "06" = Total number 17 (Use bearing "3")

Crankshaft main journal diameter:

Standard upper bearing center wall thickness (No. 1 and No. 4 journal):

Standard lower bearing center wall thickness (No. 1 and No. 4 journal):

Standard upper bearing center wall thickness (No. 2 and No. 3 journal):

Standard lower bearing center wall thickness (No. 2 and No. 3 journal):