Vehicle Stability Control System (for Vacuum Brake Booster)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster): TERMINALS OF ECU

TERMINALS OF ECU

1. SKID CONTROL ECU









*1: for 4WD
*2: for Automatic Transmission
*3: with Rear Differential Lock
*4: without Rear Differential Lock
2. CHECK SKID CONTROL ECU





(a) Disconnect the S1 skid control ECU connector.
(b) Measure the voltage or resistance according to the value(s) in the table below.
HINT: Voltage cannot be measured with the connector connected to the skid control ECU as the connector is watertight.

Standard:





*1: for 4WD