Timing Components: Specifications

NO. 1 CHAIN TENSIONER ASSEMBLY





Install a new gasket and the chain tensioner No.1 with the bolt and nut.
Torque 10 Nm (102 kgf-cm, 7 ft-lbf)

NO. 2 CHAIN TENSIONER ASSEMBLY





Install the chain tensioner assembly No.2 with the nut.
Torque 18 Nm (185 kgf-cm, 13 ft-lbf)

CRANKSHAFT PULLEY

Torque 260 Nm (2,650 kgf-cm, 192 ft-lbf)


TIMING CHAIN COVER






Temporarily install the the timing chain cover with the 19 bolts and 2 nuts, but do not tighten the bolts and nuts yet.
Excluding bolts A, fully tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3.
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

Bolt length:
75 mm (2.95 in.) for bolt A (M10)
75 mm (2.95 in.) for bolt B (M8)
87 mm (3.43 in.) for bolt C
95 mm (3.74 in.) for bolt D

Fully tighten the bolts labeled A in this order: Area 2 and Area 3.
Torque 46 Nm (469 kgf-cm, 34 ft-lbf)
Fully tighten the bolts labeled E in Area 4.
Torque 21 Nm (214 kgf-cm, 15 ft-lbf)

Bolt length:
35 mm (1.37 in.) for bolt E