Installation

2TR-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: INSTALLATION

INSTALLATION





1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

NOTE:
- Avoid any physical impact to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.

(a) Install the accelerator pedal with the 2 bolts.
Torque: 5 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the accelerator position sensor connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)